We will be closed Thursday & Friday, September 21-22 in observance of Rosh Hashanah.
Visit Ipcontrol
Visit our LinkedIn page
Add us on Google Plus
Follow us on Twitter
Like our Facebook Page
Visit our Youtube channel
Visit our Wordpress blog

VCT-400

VGA distribution system using CAT5 unshielded twisted pair cabling

01_VCT_400_Stack
02_VCT-400_Front03_VCT-400_Back04_VCT_400_Diagram

The VCAT series is a high resolution VGA distribution system (transmitter and receiver) designed to broadcast desktop video signals over unshielded twisted pair cabling (CAT5) on up to 16 video devices such as desktop monitors, and presentation monitors.

  • Uses easy to install, inexpensive CAT5.
  • Output reaches up to 1,000 feet.
  • Supports high resolution clear video up to 1920×1200.
  • 300 MHz Bandwidth.
  • Sends high-resolution VGA signals and stereo audio to 4 devices up to 1000 feet.
  • Compatible with VGA, XGA, Sun, MAC and SGI Signals.
  • Sync Format / Polarity Preservation.
  • High ground loop immunity.
  • Built-in lightning, power surge and transient protection.
  • Remote Units come with Buffered Outputs.
  • Designated trimmer in the remote unit to compensate for cable length.
  • Metal Case Enclosure.
  • External power supply.

Presentations

Enhances any presentation from commercial products to corporate financial data. It can be used in show rooms, board rooms, trade shows and window displays.

Data Broadcasting

Data such as news, stock prices, sports results, and flight information can be broadcast in real time to various monitors and/or speakers.

Learning and Training

VCT-400 can be used in educational presentations to multiple locations, in schools and in other training facilities.

Video
Bandwidth 400MHz
Analog signal Level 1 volt
Impedance 75 ohms
Connector High density HD15
Format VGA/SVGA/XGA/UXGA/RGBH/RGsB
Sync TTL horizontal SyncRange: 15 to 130 KHz Vertical Sync Range 30 to 120 Hz
Signal level OdB
Impedance 10K ohms
Connector 3.5 mm jack socket
System Cable
Type Cat5 UTP EIA 568A
Connector RJ45
Power
Requirements 5V DC @500mA
Connector 5×2.1 DC Jack

This is an example of what a setup would look like.
For more detailed information on specific models, call the number to the upper right side of your screen.4

Model# Description
VCT-400S UXGA, YUV, Y/C Point-To-Multipoint CAT5 Extender, 4-Port Transmitter. Includes: [VCT-TX400, (CCVGAMM06), & (PS5VD2A)]
VCT-RX100S VCT UXGA CAT5 Receiver. Includes: [VCT-RX100 & (PS5VD2A)]

Reviews

There are no reviews yet.

Be the first to review “VCT-400”

Your email address will not be published. Required fields are marked *